My Cart

VIQUA PRO10 NSF Class A Validated 10 GPM UV Water Disinfection System

$1,927.10

& FREE SHIPPING

In stock
SKU
PRO10
Quantity-Minus
  • Flexibility to connect to either 1¼” MNPT or 1” FNPT.
  • LightWise Technology allows the controller to reduce lamp power during periods of no water flow. By adjusting the lamp power, water temperature is maintained below 40˚C (104˚F), the rate of sleeve fouling is consequently reduced by as much as 60%, resulting in estimated energy savings of 30%.
  • The CoolTouch Fan significantly reduces water temperature and does not waste any water.
  • For the sleeve bolts a quartertwist to the positive stop and you’re done.
  • No tools, no risk of over-tightening.
  • Like a standard plug - no more grounding wires!
  • The optional plug-and-play solenoid valve stops water flow in the event that water treatment is compromised.
  • Assembly is simplified by the use of an integral flow restrictor.
  • Lower maintenance (Up to 60% less maintenance).
  • Decrease conditions that contribute to fouling and corresponding maintenance.
  • Increase time period between required maintenance.

PRO10 - Pro UV Filter System w/ LightWise Tech

Validated with NSF 55 Class A, the PRO 10 offers outstanding UV disinfection performance for commercial applications. Rated for flow rates up to 10 gpm (38 lpm) at 40 mJ/cm².

LightWise Lamp Dimming Technology: Dims the lamp under no flow conditions.

Standard Features

LightWise Lamp Dimming Technology

  • Ease of Maintenance: Up to 60% less maintenance
  • Reduced internal chamber temperature resulting in decreased sleeve fouling
  • Efficient: Estimated 30% energy savings

Connections

  • Includes dry contact connection for external functionality.
  • Solenoid Valve – which will stop the flow of water through the chamber should the UV performance fall below a safe level

Applications

  • Perfect for a wide range of large homes or light commercial applications including, small businesses, hospitals, dentist offices, etc.

Water Quality Parameters

  • Hardness < 7 grains (120 mg/L). Install a WECOTM UXC water softener upstream of the UV system if hardness exceeds 7 grains.
  • Iron < 0.3 mg/L. Install a WECOTM Katalox Light backwash iron filter upstream of the UV iron concentration exceed 0.3 mg/L.
  • Tannins < 0.1 mg/L. Consult a WECOTM certified water specialist if your water analysis shows a higher Tannin concentration. We will custom design an anion-exchange tannin resin regenerative system tailored to your needs.

Benefits

  • Ease of Maintenance: Use the diagnostic system display to troubleshoot, should a problem arise
  • High-performance amalgam UV lamp, reduces maintenance requirements by lasting up to 2 years replacement
  • Reliable: New, market leading flow-meter / UV sensor combination provides real-time UV dose
  • Powerful/Space Saving: Revolutionary Amalgam lamp provides 4x the output of standard output lamps, giving you compact single-lamp systems that are half the size of their predecessors
  • Convenient: Features countdown timer with digital display and audible lamp change reminder for ease of maintenance
  • Cool-Touch fan technology helps reduce the temperature within the chamber to prevent overheating

Accessories are Available

* Optional Accessories: COMMcenter – Displays UV dose, alarm history, lamp hours and other performance parameters.

Specifications

Models Flow Rate (GPM) In/Out System Dimensions System Weight Replacement Lamp/Sleeve Kit Replacement Lamp Replacement Sleeve Replacement Sensor Certification
PRO10 10 1¼” MNPT or 1” FNPT 22″ x 4″ (54 cm x 10 cm) 25 lbs (11.3 kg) 602850-101 602854 602974 650580 NSF 55-A
PRO20 20 1¼” MNPT or 1” FNPT 31″ x 4″ (78 cm x 10 cm) 28 lbs (12.7 kg) 602850-102 602855 602975 650580 NSF 55-A
PRO30 30 1¼” MNPT or 1” FNPT 41″ x 4″ (103 cm x 10 cm) 31 lbs (14 kg) 602850-103 602856 602976 650580 NSF 55-A
More Information
UPC No
Specifications No
QA Image No
PDF Guide No
Write Your Own Review
You're reviewing:VIQUA PRO10 NSF Class A Validated 10 GPM UV Water Disinfection System