My Cart

WECO ECON-50P Economy Booster Pump Kit for Reverse Osmosis (RO) / DI Water Filters -up to 50 Gallons Per Day

SKU
ECON-50P
Rating:
96 % of 100
5  Reviews Add Your Review
Price: $110.81
Free Shipping
Parts In stock
Quantity Price
2 - 3 Price: $105.27
4+ Price: $103.05
No shipping discounts / Promotions for bulk purchases
- +
YOUR PRICE
$110.81
- +
  • Economy pump and accessories. Correct low pressure problems or increase production of your existing reverse osmosis water filter system and maintain proper water pressure for maximum pure water output.
  • Achieve higher total dissolves solids (TDS) rejection for maximum contaminant reduction.
  • ¼" Quick connect fittings on pump and tank pressure sensor.
  • Tank pressure sensor included for automatic pump on/off control.
  • Includes 24VDC 1.2 Amp pump and 110V power supply.
  • Up to 50 gallons per day.
  • Maximum outlet pressure 125 PSI.
  • Open flow 0.3 GPM (1.2 LPM).
  • Compatible with any drinking water Reverse Osmosis (RO) or RO/DI system for aquariums/labs with under 50 gallons per day production with 1/4" tubing.
Automatic

Automatic Pump Control

  • Install the high-pressure sensor on the tank water line.
  • The high-pressure sensor (deactivated at around 40 PSI) cuts off power to the pump when the pressurized water storage tank has reached the capacity.
Easily

Easily Pressurize the RO Feed Water

  • Connect your water source to the inlet of the booster pump.
  • Pump outlet connects to the RO inlet.
  • Flow direction arrows printed on the head of the booster pump.
Quick

Quick Connect / Disconnect Fittings

  • Push-to-connect fittings allow for a quick and easy leak-free tubing connection.
  • Positive displacement, three chamber, permanent magnet pump design.
  • Self priming and runs dry without damage.

Complete Electrical Wire Harness Included

  • Wire harness for the transformer, high pressure sensor and pump included.
  • Connect the components following the diagram below and plug in the booster pump power supply to a 110V power source.
  • Mount pump to the wall or under the cabinet to minimize vibration noises.

RO/DI Economy Water Pressure Booster Pumps

Most revers osmosis membranes are designed to work with 60 PSI or higher water pressure, where they are tested to yield a stable rejection rate of at least 97.5%.

If the water pressure feeding an RO system is less than that, the system will produce less water and at a lower quality. Additionally, production is reduced whenever the water temperature is below 77 °F. Well systems most commonly have pressurized storage tank and pump systems with 20/40 psi or 30/50 psi on/off pressure settings.

  • Adding an electric booster pump increases the RO production rate.
  • RO/DI pumps boosts the pressure tank storage volume.
  • Increased pressure results in rejecting of more contaminants, cleaner water.

Easy Setup with Your Existing Under Sink Drinking Water Reverse Osmosis Water Filter System

  • Pump comes with a mounting bracket. Mount vertically for optimum performance.
  • Note the flow direction arrows on the pump and connect the source water and RO inlet lines.
  • Mount the pressure switch on the pressurized water storage tank line.
  • Connect the pressure switch wire cords with the transformer and pump.
  • Turn on the water and check for leaks. Pump allows forward water flow even without electricity.
  • Plug the transformer in to a power source to energize the pump. Monitor the performance.

Technical Specifications

Transformer Voltage 110 V AC
Pump Voltage 24 V DC
Parts 1/4 Inch Quick Connect
Bypass 120 PSI
Pump Design Positive Displacement
Diaphragm Three Chamber
Motor Permanent Magnet
Max. Temperature 140 °F
RO Production (Gallons Per Day)
Transformer Power Rating
Pump Voltage
Tubing Connectio
Includes Pressure Switch
Wiring Harness
Runs Dry
ECON-50P

50 GPD
AC 110V-240V | 50/60 Hz | 1.2A
24 VDC
1/4 Inch Push-to-Connect
RO Production (Gallons Per Day)
Transformer Power Rating
Pump Voltage
Tubing Connectio
Includes Pressure Switch
Wiring Harness
Runs Dry
ECON-100P

100 GPD
AC 110V-240V | 50/60 Hz | 1.5A
24 VDC
1/4 Inch Push-to-Connect
RO Production (Gallons Per Day)
Transformer Power Rating
Pump Voltage
Tubing Connectio
Includes Pressure Switch
Wiring Harness
Runs Dry
ECON-300P

300 GPD
AC 110V-240V | 50/60 Hz | 2.2A
36 VDC
3/8 Inch Push-to-Connect
More Information
UPC 719284871496
You're reviewing:
You're reviewing: WECO ECON-50P Economy Booster Pump Kit for Reverse Osmosis (RO) / DI Water Filters -up to 50 Gallons Per Day
Your Rating

Browse File to Upload

Your Question : WECO ECON-50P Economy Booster Pump Kit for Reverse Osmosis (RO) / DI Water Filters -up to 50 Gallons Per Day

Browse File to Upload

No question found!
×