My Cart

LUMINOR BLACKCOMB HO 7.9 GPM 1" MPT NSF Class A Validated UV Water Filtration System

SKU
LBH6-251A
Be the first to review this product
In stock
  • NSF Class A Flow Rate (40 mJ/cm² @ 70%UV Transmittance) 7.9 gpm.
  • True 254nm Teflon® based UV sensor continuously measures and displays UV output (as a %).
  • Colour screen controller with Lightlock™ for protected lamp replacement, includes QR codes, full diagnostics & warnings.
  • Axial flow, stainless steel polished reactors, designed & manufactured to ASME pressure vessel standards (316L on LBH6 unit).
  • User friendly bayonet style lamp connector (quick ¼ turn removal with no extra tools needed).
  • Reliable, industry proven, proprietary low pressure coated UV lamps with ceramic bases for durability and long life (10,000 hours on LBH6 unit).
  • Constant current electronic controller in a splash proof case, fully potted ballast virtually eliminates common water damage issue.

Description:

If you are looking for an independently validated UV system for PRIMARY disinfection of a bacteriologically contaminated water source, LUMINOR’s “NSF 55 CLASS A” validated systems is your solution.

NSF Class A Flow Rate (40 mJ/cm² @ 70%UV Transmittance) of 7.9 gpm.

SAFE

  • True 254nm Teflon® based UV sensor continuously measures and displays UV output (as a %)
  • Axial flow, stainless steel polished reactors, designed & manufactured to ASME pressure vessel standards (316L on LBH6 unit).
  • UV imparts no change in taste, odor, pH or conductivity.
  • No trihalomethanes (THM's) formation.

SIMPLE

  • User friendly bayonet style lamp connector (quick ¼ turn removal with no extra tools needed)
  • Maintenance involves annual lamp replacement (provided water quality parameters are met) and quartz sleeve cleaning when needed .
  • Automatic and user friendly operation.

EFFICIENT

  • Reliable, industry proven, proprietary low pressure coated UV lamps with ceramic bases for durability and long life (10,000 hours on LBH6 unit).
  • Microorganisms are inactivated within seconds; eliminates the need for long retention times or retention tanks.

STATE-OF-ART

  • Colour screen controller with Lightlock™ for protected lamp replacement, includes QR codes, full diagnostics & warnings
  • Lower capital investment when compared to chlorine or ozone systems.

E. Coli

Giardia

Viruses



Specifications

Part
Number
Flow Rate (40mJ/cm2 @ 70% UVT)
(LPM)
Rated
Life (hrs)
Lamp
Watts
Voltage at
50/60HZ
UV
Monitor
Solenoid Output Port size I/O Water
Chamber
Reactor Dimensions
LBH6-251A 7.9 GPM 10,000 67 W 90-265V YES YES 1" MNPT Stainless A316L, A249 Pressure Rated 3.5 x 26.9”
Maximum Concentration Levels
Iron < 0.3 ppm (0.3 mg/L)
Hardness < 7 gpg (120 mg/L)
Turbidity < 1 NTU
Manganese < 0.05 PPM (0.05 mg/L)
Tannins < 0.1 ppm (0.1 mg/L)
UV Transmittance > 75%

Effectively treating water with higher concentration levels than listed above can be accomplished with WECO reverse osmosis, katalox light and/or cation softening upstream of UV. Chat online with us to discuss options.

Function of a UV Disinfection Reactor

Note: Your product may look different from the illustration

Parts & Accessories
Part
Number
Lamp Quartz
Sleeve
UV
Sensor
Optional Accessories Specific to your UV System
LBH6-401A RL-600HO RQ-600 RSHO-B3.5V - - MOD-SOL (Solenoid Module) MOD-RAM (Alarm Module) MOD-420 (4-20mA Module)

Product Rating

Warranty Information

  • Ten (10) year Limited Warranty on REACTORS
  • Three (3) year Limited Warranty on ELECTRONICS

Manufactured by

LUMINOR Environmental Inc.
80 Southgate Drive, Unit 4,
Guelph, Ontario, CANADA

You're reviewing:
You're reviewing: LUMINOR BLACKCOMB HO 7.9 GPM 1" MPT NSF Class A Validated UV Water Filtration System
Your Rating

Browse File to Upload

Your Question : LUMINOR BLACKCOMB HO 7.9 GPM 1" MPT NSF Class A Validated UV Water Filtration System

Browse File to Upload

No question found!
×