WECO CJECT-100MT: Proportional Chlorine Injection System for Well Water - Made in the U.S.A.

Safeguard Your Well Water with the WECO CJECT-100MT Proportional Chlorine Injection System (Made in the USA) pen_spark

Concerned about impurities in your well water? The WECO CJECT-100MT offers a smart and effective solution. This USA-made system utilizes a chlorine injection pump equipped with a water meter. This innovative technology ensures precise chlorine dosing based on real-time flow rates.

Imagine this: you turn on the shower. The CJECT-100MT automatically adjusts the chlorine injection to match the increased water flow, ensuring consistent performance. The same happens when you open faucets, do laundry, or run any water-using appliance. This adaptability ensures consistent water quality throughout your entire home, no matter the usage.

But the benefits extend far beyond convenience. Chlorine injected by the CJECT-100MT acts as a powerful oxidant, effectively eliminating iron, manganese, and hydrogen sulfide – common well water contaminants responsible for unpleasant odors, staining, and even premature appliance failure.

Still have concerns about your specific water quality? We're here to help! Our team of water treatment experts can analyze your water and design a complete "treatment train" tailored to your needs. This might include pre-treatment filters to remove sediment, chlorine injection, retention tanks for optimal chlorine contact time, and even dechlorination systems if desired. Additionally, we can discuss redundant protection systems for ultimate peace of mind.

Don't settle for compromised well water. Invest in the WECO CJECT-100MT and experience the confidence of clean, clear water for your entire home. Contact us today to discuss your water treatment needs and discover how the CJECT-100MT can revolutionize your well water experience.

Recommended Installation with Included Water Flow Meter & Check Valve Feeder

Plastic No-Lead Series Meter

Reinforced Nylon No-Lead Water Flow Meter: Engineered with a 100 PSI max pressure rating and high-flow 1-inch NPT ports.

Injection Tee

The unit includes a chemical injection tee that introduces chemical liquid.

Inline Static Mixer

Internal baffles facilitate the rapid mixing of chemical into the water as it passes through the inline static mixer.

Professional plumbing support is necessary.

Professional plumbing is essential for installing this chlorine injection system. DIY use is unsafe due to potential hazards with chemicals.

For your safety, always wear personal protective equipment (PPE), follow established safety protocols, and store chemicals properly segregated from each other, especially oxidizing agents, to prevent serious injuries and unintended reactions.

Standard Features

Connections

• 1" MNPT Flow Meter
• 1" MNPT Static Mixer

Simplified Installation for Professional Results

• Pre-assembled Components: The pump and chemical tank arrive mostly pre-assembled, minimizing on-site work.
• Suction Line Protection: A weighted suction line strainer is pre-installed on the peristaltic metering pump for optimal performance.
• Clear Electrical Connections: The system includes pre-wired cables with color-coded wires (black to black, red to red) for straightforward connection by the installer.
• Standard Power Requirements: The system operates on standard 110VAC 60Hz power and needs to be plugged into a Ground Fault Circuit-Interrupter (GFCI) outlet for safety.

Warnings

• RISK OF EXPOSURE: Serious risk of burns, fire, explosion, personal injury, or property damage. Mandatory use of proper personal protective equipment (PPE) to reduce exposure.
• RISK OF FIRE HAZARD: DO NOT install or operate on any flammable surface.
• RISK OF CHEMICAL OVERDOSE: To reduce risk, follow proper installation methods and recommendations. Check your local codes for additional guidelines.
• To reduce the risk of injury, do not permit children to use this product. This appliance is not to be used by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

Materials of Construction

• Non-toxic materials, suitable for drinking water
• Pump Housing: Polycarbonate
• Pump Tube & Check Valve Duckbill: Santoprene
• Tube & Injection Fittings: PVC or Polypropylene
• Fasteners: Stainless Steel.

Models	Power	Ports	Operating Temperature	Operating Pressure
CJECT-100MT	110 VAC 60 Hz	1 Inch MNPT	40-100 F	40-80 PSI